What is a Car Snorkel?
A car snorkel is a raised inlet pipe that captures air from the roof height of your vehicle, down to your engine bay. It allows for cleaner, cooler air to be fed into your engine, which can help it run more efficiently.
It also keeps water from entering your engine, which is particularly important when driving in wet conditions. Whether it’s rain, mud or snow, a snorkel will keep your engine dry and running smoothly.
A snorkel is a car modification that increases the air intake of your engine. It can be a very effective way to increase the power and efficiency of your vehicle.
The main purpose of a snorkel is to keep your engine running clean and cool while keeping dust particles, water and other contaminants out of the air that enters it. This helps improve performance and fuel economy as well as take pressure off of your air filters.
It does this by moving the air intake from below your hood and up above the roof, creating a ram effect that allows the engine to take in more air than it would without one.
Depending on the model, some snorkels feature a pre-cleaner that keeps out most of the dust, dirt and other microparticles from entering your engine. Other models use a cyclonic filter that catches larger dust and dirt particles.
Snorkels are also great at preventing water from entering your engine while you are driving through heavy rain or battling high tides. They protect your engine from water damage that could otherwise cause it to stall or even break down.
This is especially important for trucks and SUVs that aren’t rated for wading through deep water. The electrical elements in the top of your engine bay aren’t hardened against water intrusion.
That’s why it’s so important to install a snorkel as soon as you can. Fender Flare This can help your engine run safer and more efficiently in all kinds of conditions, even if you don’t have to cross rivers or other waterways often.
Snorkels can be installed on vehicles of all sizes, although they do have their limitations. The best ones are specifically designed to pull air from a higher location than your stock airbox, avoiding catastrophic engine failure due to water ingestion.
A car snorkel is a great way to keep the engine of your off-road vehicle running efficiently. It helps to prevent dust, dirt and water from clogging the air filters and potentially leading to the failure of the air filter or (in extreme cases) catastrophic engine damage.
Snorkels also work to improve fuel efficiency by taking in cooler, cleaner air than the factory air intake. This can mean up to a 10% improvement in fuel economy.
To install a car snorkel, first remove the factory air box, air filter and lower intake duct, which you can do with a small pry tool. Then, clean the lower intake area and reinstall the upper airbox and filter.
Once the air box is back in place, thread the hose clamp onto the end of the adapter that is on the intake side of the fender. Slide the other end of the hose clamp onto the end that fits through the round hole in the bottom of the adapter. Then, tighten the hose clamp on both ends until snug.
While installing a snorkel, it’s a good idea to put silicone caulking around the factory air box and in the air inlet holes on the top of the hood to help keep water from entering the intake during water crossings. This will also keep debris out of the airbox and clog up the intake.
It’s also a good idea to make sure the hood is a tight fit to the body of your vehicle. A loose hood can let water in to the engine bay and potentially cause hydro-locking, which is a serious problem when driving through water.
One of the best things about a car snorkel is that it can be adjusted to match the conditions of your driving, so it will take in more or less air depending on what you’re doing. During paved road driving, the air inlet on the snorkel should face forward, while on rough dirt roads it can be rotated to face the rear of the vehicle.
When it comes to installing a snorkel, there are a few different methods that will work for most vehicles. Some kits come with PVC pipes and grommets, while others are made from silicon hoses. This is important because the material you use can have a big impact on how long your air filter lasts.
The air filter of a car snorkel is used to keep the engine air clean. This is essential in situations like when a vehicle crosses rivers or unexpected floodways. Water entering the air intake could do serious damage to the engine block.
A snorkel also prevents dust from entering the air intake under the vehicle’s wheel well, which can lead to clogging and restriction of the air filter and engine. It is this clogging of the air filter that can cause issues such as poor power and fuel economy.
There are two types of filters available for a vehicle snorkel: the ram-type and the cyclone-type. The ram-type filters are shaped like a cylinder with vanes that tilt inside, causing the air to swirl violently. This creates a vortex-like effect that pushes debris out of the filter.
The ram-type filters can be positioned to face forward or backward depending on driving conditions. For normal on-pavement driving the air inlet of a snorkel should be facing forward to ensure that fresh air enters the air duct, keeping the engine clean. When driving through dusty conditions the air inlet should be facing rearward to allow dust filled air to escape from the snorkel and the engine filter.
In the case of a vehicle snorkel with a pre-cleaner installed (discussed in more detail below) repositioning is not required, regardless of the driving conditions. The pre cleaner acts as a secondary filtration system and helps to prevent larger dust particles from entering the snorkel and the engine filter.
Moreover, it will also help to keep water from entering the engine intake while driving through rain or snow storms. The water will not saturate the air filter as it would with a ram-type filter and will be pushed out of the snorkel to the sides of the head, where it can be easily cleaned.
Snorkels are not just a tool to use when crossing rivers and lakes – they can also Fender Flare be installed in other off-road environments such as deserts and snowy mountains. They raise the engine’s air intake and send cleaner air into the engine, making it more efficient and less likely to stall. It also helps to keep the engine from getting clogged with trail dust, which can cause problems such as rusting.
Snorkels are an excellent way to make your 4×4 look more rugged. You’ll see them on everything from wide, all-terrain tyres to stone deflectors and side cladding.
They are also a great way to boost your vehicle’s airflow, which in turn improves your engine’s performance and fuel consumption. This is a good thing, especially if you’re driving in dusty conditions or in a convoy.
A well-designed snorkel will also let your car “breathe” when you’re wading through water. This will help to keep your engine cooler and reduce the risk of hydro-locking, which can be dangerous and even fatal.
The best car snorkels will fit snugly against your vehicle’s bodywork, and are sized to bolt onto your standard air intake duct. They also come with gaskets and seals to prevent leaks.
In my opinion, it’s difficult to beat a well-designed snorkel for the most important function of all: improving your car’s airflow. They’ll also improve your vehicle’s overall safety and reliability.
They are also an excellent way to make your 4×4 the talk of the town. Having one on your vehicle will also increase its visibility, which can be an invaluable advantage in certain circumstances. For example, it can be a useful aid for first responders who may be responding to a fire on your property or in the bush. Adding a snorkel to your 4×4 is a relatively easy and inexpensive project that can enhance its performance. It’s also a great accessory to have when you’re out off-roading, which will help you stay safe and dry in the most extreme conditions. The best part is that it’s a fun and exciting thing to do, so don’t be afraid to try it out!