LED Off Road Driving Lights For Your 4WD
Having powerful off road driving lights on your 4WD can give you a slice of daylight when you need it. They help you safely navigate rough terrain in the dark.
LED (light emitting diode) off-road lighting uses much less power to put out the same amount of light as dated halogen technology. They also last far longer than halogens do.
LED Lights
LEDs are solid-state devices that emit visible light when current runs through them. The device consists of two semiconducting materials — a p-type and an n-type — that have been dipped into a chemical to alter their electrical properties (called doping). When current flows through the LED, it produces photons — particles of light — that radiate outward from the top and bottom of the device. Because they’re so small and require less power to operate, they’ve found their way into all sorts of gadgets and applications. They’re used in indicator lights on many electronics, as status displays on vehicles and equipment, and even in large-area displays such as stadium displays or dynamic message signs on freeways.
The brightness of an LED is regulated by how much voltage is fed into it. If the voltage is too low, LED Off Road Driving Lights little current will run through the junction, and the LED will produce very little light. If the voltage is too high, however, the device may overheat and be irreversibly damaged.
LEDs come in a variety of shapes and sizes, and they can be combined in bunches for a traditional bulb or strung out in a linear fashion like Christmas lights. They can also be grouped together to create different colors. Some LEDs are a single color, while others are three-color, such as RGB LEDs that combine red, green and blue to produce all the colors of the rainbow.
Flood Lights
LED Flood lights emit a powerful broad beam of light rather than a focused narrow beam like a spotlight. This type of lighting is used to illuminate large outdoor areas such as parking lots or roadways for safety and visibility. LED Uncle flood lights are available in a variety of wattages and lumens to suit your needs. The higher the wattage, the brighter the light but the more energy it consumes.
LED outdoor flood lights are commonly mounted on buildings or poles to provide directional illumination to a wide range of spaces. They are ideal for lighting areas used for security, vehicle and pedestrian traffic, building wall washing and other large areas in need of general outdoor illumination. They can also create a welcoming atmosphere for retail establishments where a poorly lit entrance could turn customers away from your store.
The color temperature of the LED bulbs used in flood lights can influence the mood and ambiance created by the lighting. Warmer colors can create a more relaxed and inviting atmosphere while cooler colors can convey a sense of urgency and alertness. Many LED outdoor flood lights come with a motion sensor to automatically turn the lighting on when movement is detected and off at dawn, helping to reduce electricity usage. These lights are also available in a variety of mounting options to meet your specific application and budget.
High-Beam Lights
High-beam lights, also known as full or main beams, emit brighter light rays to illuminate the road for a greater distance. They have a standard cutoff point to prevent blinding oncoming traffic. It is important to note that driving with high-beams on is illegal in some states, because it could cause other drivers to be blinded. However, this is not a custom headlight parts concern with LED headlights because the rays do not reflect off of other vehicles’ windows and do not enter the eyes of oncoming drivers.
In addition to seeing farther on the road, a good set of high-beam lights can help drivers see obstacles and debris that are not visible during the daytime. This is particularly true in adverse weather conditions, such as fog and rain.
While you may be able to see farther under most conditions in high-beam mode, your powerful blast of light reduces the visibility of oncoming cars (sometimes for a significant amount of time). Imagine traveling on a two-lane road at 50 mph with incoming traffic. The vehicles are approaching each other at about 100 mph, and the closeness of the vehicles means that less of the surrounding region and other traffic is visible. When this occurs, it can be challenging for other motorists to safely merge into your lane. High-beam lights help to alleviate this problem by illuminating the road for a greater distance and helping other motorists see their own hazards.
Work Lights
When you’re out in the middle of nowhere at night or during a snowstorm, your truck needs a reliable way to see. LED lights are more efficient than traditional bulbs, draw less amperage and come in a wide variety of beam patterns. They’re also durable enough to withstand the hard impacts and rough vibrations that occur on off-road terrain.
Different LED lights feature different bulb and reflector combinations that create the light pattern you want. For example, spotlights are great for long-distance visibility because of their sharply focused lens. On the other hand, if you’re driving at lower speeds on twisty trails, you might prefer a fog light or a flood light to provide more general illumination.
Similarly, there are LED work lights that mount on your vehicle to illuminate an area near your truck, or in some cases, on its sides or rear. These lights are useful for camping, working on your truck in the garage or any other outdoor job that requires bright light. They’re usually powered by replaceable batteries, so you don’t have to worry about running out of power.
You can find LED lights in a range of color options as well, which is helpful when you’re going to be using your lights in public. For instance, some people prefer to use amber work lights because they can be seen better in fog or low visibility conditions. Other people choose to use strobe LEDs because they’re more likely to attract attention from other drivers, which is ideal for emergency situations.